Pontoon cubes

A hinged storage cube keeps lines, pins, and small fenders on the dock instead of in the boat. Same 500 × 500 mm grey HDPE footprint as a standard Aussie Cube, so it drops into any layout. $249 AUD. Use one on a swim platform or at the shore end of a residential pontoon. 5-year UV warranty. Shipping calculated at checkout (Standard & Express). Free Standard Sydney Metro on 16+ cubes only; smaller orders use the shipping calculator.

Round off a swim-out or soften a jetty corner with the triangle cube. It pins to standard 500 × 500 Aussie Cubes so you can build an irregular floating dock without leaving a square bite out of the water. $135 AUD. Grey HDPE, same 400 mm height as the rest of the system. Handy on swim platforms, residential pontoons, and the water edge of a DIY jetty. Pins to standard Aussie Cubes 5-year UV warranty Shipping calculated at checkout (Standard & Express). Free Standard delivery Sydney Metro on 16+ cubes only; shipping calculator for estimates

Walkways go down quicker with a double cube. Each module is 1000 × 500 × 400 mm of UV-stabilised HDPE — twice the length of a standard Aussie Cube — and it locks in with the same mushroom centre pins. No tools, no aluminium frame, no timber deck to seal. Use doubles for marina walkways, a gangway onto a jetty, and long residential pontoons where you want fewer joins. Mix them with 500 × 500 cubes, triangles, and pile cubes when the layout turns a corner. 1000 × 500 × 400 mm grey HDPE $190 AUD Same pin system as the standard cube 5-year UV warranty Shipping calculated at checkout (Standard & Express). Free Standard delivery Sydney Metro on 16+ cubes only; shipping calculator for estimates

Hold a floating pontoon in still water with a pile cube. The inner opening takes a post so the dock can rise and fall without wandering off the bank. $279 AUD. Same 500 × 500 footprint and mushroom-pin lugs as a standard cube, so it sits in the grid of a DIY jetty or marina walkway. Suits lakes, canals, and sheltered rivers — pair it with extra ties if the site has wash. Inner pile / post guide 5-year UV warranty Shipping calculated at checkout (Standard & Express). Free Standard delivery Sydney Metro on 16+ cubes only; shipping calculator for estimates

Build a jetty, pontoon, or swim platform in whatever shape you need. Each Aussie Cube is a 500 × 500 × 400 mm grey HDPE module with a non-slip deck. Cubes lock together with mushroom pins. No tools. Reconfigure later. This is a modular cube dock, not an aluminium-frame timber pontoon. Four cubes make 1 m² of floating deck. Lay them on the bank, pin the corners, and launch. Use them for residential jetties, boat and jet ski platforms, marina walkways, and work pontoons. Specs Size 500 × 500 × 400 mm Weight About 7 kg Buoyancy About 350 kg/m² (four cubes per m²) Material UV-stabilised recyclable HDPE Assembly Mushroom centre pin, tool-free Warranty 5-year UV Delivery Shipping calculated at checkout (Standard & Express). Free Standard Sydney Metro on 16+ cubes (e.g. Swim Platform Kit). Smaller orders & Express via shipping calculator / checkout Pins: Kits include locking pins. Ordering loose cubes for a DIY build? Contact us or call Brenden on 0402 426 847 for pin packs — pins are not currently sold solo. Order one cube to start a DIY pontoon, or jump to a kit if you already know the size. Need a layout? Use the build a dock calculator or call Brenden on 0402 426 847.